xinnuo

CN / EN
phone Hotline: 86-20-85820052
banner

Correct installation and operation of nylon pipe

  • Categories:Company News
  • Time of issue:2020-05-04 17:46
  • Views:

(Summary description)Nylon pipe has the advantages of simple processing, stable size, low permeability, great resistance, long service life and good temperature resistance. It can be used to transport compressed air, water, fuel oil, chemical solvent, liquid food, etc. Therefore, the use of nylon pipe is quite extensive. Then the correct installation and use of nylon pipe need to follow certain principles, there will be some points for attention.

Correct installation and operation of nylon pipe

(Summary description)Nylon pipe has the advantages of simple processing, stable size, low permeability, great resistance, long service life and good temperature resistance. It can be used to transport compressed air, water, fuel oil, chemical solvent, liquid food, etc. Therefore, the use of nylon pipe is quite extensive. Then the correct installation and use of nylon pipe need to follow certain principles, there will be some points for attention.

  • Categories:Company News
  • Time of issue:2020-05-04 17:46
  • Views:
Information

尼龙管正确的安装操作方法

 

Nylon pipe has the advantages of simple processing, stable size, low permeability, great resistance, long service life and good temperature resistance. It can be used to transport compressed air, water, fuel oil, chemical solvent, liquid food, etc. Therefore, the use of nylon pipe is quite extensive. Then the correct installation and use of nylon pipe need to follow certain principles, there will be some points for attention.
Key points for installation and use of nylon pipe:
1. When nylon pipe is used, if the temperature of working environment is too high, it may affect the working pressure and even make the nylon pipe break.
2. Please do not apply tension and twisting load to nylon pipe, otherwise it may break and break off and damage nylon pipe.
3. Water or hot medium oil, please use heat-resistant water pipe, otherwise, there will be aging and the possibility of rupture.
4. Don't let the nylon pipe rub and entangle, which may cause the nylon pipe to break.
5. Please use nylon tube above the minimum bending radius.
6. Sufficient allowance shall be reserved for piping length.
7. If the nylon tube is filled with water, please use an intubation. If not, the nylon tube may fall off.
8. When nylon pipe is used, if there is chemical gas in the working environment, it may lead to nylon pipe cracking.
9. When installing the nylon pipe on the quick plug, the cross section of the nylon pipe should be vertical, and the outer circumference of the nylon pipe should not be damaged or oval.
10. Nylon pipe drilling: drill with an outer diameter less than or equal to 1 / 3 of the rod diameter. The drilling angle is 90-110 ° and the vehicle speed is lower than 400R / min. the drill bit shall be withdrawn in time. After cooling with water or saponified oil, the drilling or reaming shall be continued according to the above operating procedures.
Nylon pipe installation and use must pay attention to the key points, because these if not enough attention, may lead to nylon pipe damage, rupture and other consequences, causing great safety risks.

Scan the QR code to read on your phone

Previous page
1
2
phone

Phone:86-20-85820052

fax

Fax:86-20-31564663

add

No.3, Plant 2, Bang Jiang East Village Section, Fuyi Road, Dalong Subdistrict of Pan Yu District, Guangzhou City, China 

Copyright:Guangzhou Xinnuo Special Fiber Co., Ltd            粤ICP备20027426号​